Dr.G.Srinivasa Rao



(Download the bio-data)

Designation: Professor

Qualifications:
2009, Ph.D, National Institute of Technology, Warangal, Andhra Pradesh
1994, M.E(Industrial Engineering), Andhra University, Vizag, Andhra Pradesh
1990, B.E(Mechanical Engineering), Andhra University, Vizag, Andhra Pradesh

Area of Interests: Production and Induatrial Engineering

Date of Birth: 14-06-69

Date of Joining: 31-08-96

Teaching Experience: 21 Years
Industry Experience: 2 Years

Research Publications:

  • International/National Journals: 26
  • International/National Conferences: 32
List of Paper Publications in International/National Journals

  • A.K.Senapathi, Siva Sankara Raju, Gunji Srinivas Rao, "Tribological Performance of Al-MMC Reinforced with Treated Fly Ash Using Response Surface Methodology", Indian Journal of Science and Technology, Vol 10(15), DOI: 10.17485/ijst/2017/v10i15/113824, April 2017,. Page no: 1-9.
  • Siva Sankara Raju, A.K.Senapathi, Gunji Srinivas Rao, "Estimation of tribological performance of Al-MMC reinforced with a Novel In-Situ ternary mixture", Indian Journal of Science and Technology, Vol 10(15), DOI: 10.17485/ijst/2017/v10i15/113825, April 2017, Page no: 1-9.
  • Siva Sankara Raju, Gunji Srinivas Rao, "Assessments of Desirability Wear Behaviour on Al-Coconut Shell Ash -Metal Matrix Composite Using Grey - Fuzzy Reasoning Grade", Indian Journal of Science and Technology, Vol 10(15), DOI: 10.17485/ijst/2017/v10i15/113826, April 2017, Page no: 1-11.
  • U Gayatri, G Srinivasarao, M Ramakrishna "Fabrication and Testing of Composite Material made of Prawn's Shell Powder" RECENT, Vol. 17, no. 4(50), November, 2016: 553-561.
  • Srinivasa Rao G, Suneel D, Manikant KGSV, Praveen D. "Mathematical modelling of surface roughness in hard turning for evaluating the effects of process and tool parameters". Discovery, 2016, 52(246), 1366-1373.
  • V.Nageswara Reddy, G.Srinivasa Rao and K.Thirupathi Reddy "Heat energy balance of a single cylinder variable compression ratio diesel engine operating on alternative fuels" Elixir Mech.Engg. 96(2016)41609-41615, pp. 237-244, (Elixir International Journal).
  • P.Bharathi, T.G.L. Priyanka, G.Srinivasarao, B.Nageswararao "Optimum WEDM process parameters of SS304 Using taguchi method" International Journal of Industrial and Manufacturing systems Engineering, Vol.1, No.3,2016, pp.69-72.
  • Srinivasarao.G, Suneel.D, Santhipriya.P. "Modeling of Surface Roughness for AISI 52100 steel in WEDM by design of experiments", International Journal of Engineering Research and technology, Vol. 5, No.5. 2016: 234-239. (1.76)
  • G. Srinivasarao "Modeling of cutting speed for AISI 52100 steel in WEDM by design of experiments" BLB International Journal of science and technology, Special Issue November 2015: 215-221.
  • Siva sankar raju. R., Muralidhararao.M and G. Srinivasarao "Optimization of machinabilty properties on aluminium metal matrix composite prepared by In-situ ceramic mixture using coconut shell ash- Taguchi approachl" International Journal of Conceptions on Mechanical and Civil Engineering, Vol. 3, No.2. 2015: 2357-2760.
  • V.Nageswara Reddy and G.Srinivasa Rao, "Experimental Investigation of the effect of BTE and NOX in a direct injection VCR diesel engine running with rice bran methyl ester" South Asian Journal of Engineering and Technology, Vol. 2, No.1,2015, 18-23.
  • G. Srinivasarao "Modeling and optimization of tool parameters in the presence of variable process conditions using taguchi robust design" Journal of Machining and Forming Technologies, Vol. 6, No.3-4. 2015: 131-145. (This paper is forwarded to publish in this journal from the convener, International Conference on Industrial, Mechanical and Production Engineering: Advancements and Current Trends (ICIMPACT-2014), M.A. National Institute of Technology, Bhopal).
  • SB Venkata Siva, RI Ganguly, G Srinivasa Rao and KL Sahoo. "Quantitative studies on wear behavior of Al-(Al2O3-SiC-C) composite prepared with in situ ceramic composite developed from colliery waste" Journal of Engineering Tribology, Vol. 229, No.7. 2015: 823-824.
  • S.B.Venkata Siva ,R.I. Ganguly, G. Srinivasarao and K. L. Sahoo, "Wear behaviour of novel Al based composite reinforced with ceramic composite (Al2O3-SiC-C) developed from colliery shale material" Tribology, Vol. 8, No.3. 2014: 117-124.
  • S.B.Venkata Siva R.I. Ganguly, G. Srinivasarao and K. L. Sahoo, "Machinability of aluminium metal matrix composite reinforced with in-situ ceramic composite developed from mines waste colliery shale" - Materials and Manufacturing processes (Taylor and Francis), Vol. 28, No.10: 2013, 1082-1089.
  • Venkata Siva S. B, K. L. Sahoo, R. I. Ganguly, R. R. Dash, S. K. Singh, B. K. Satpathy, G. Srinivasarao, "Preparation of Aluminium Metal Matrix Composite with a Novel In-situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material" - Metallurgical and Materials Transactions B (Springer), Vol. 44, No.4, 2013, 800-808.
  • Srinivasarao,G. and Venkata Siva S. B. "Performance evaluation of carbide inserts on surface roughness in hard turning using mathematical modeling", International Journal of Applied Sciences and Engineering Research, Vol. 2, No.2,2013, 107-118.
  • V.Nageswara reddy, R.Vidyasagar raju, B.Dinesh babu, R.Meenakshi reddy and G.Srinivasarao, "Performance and Emission analysis on single cylinder diesel engine using dual fuels" - International Journal of Engineering Research and Technology, Vol. 2, No.9, 2013, 1267-1274.
  • V.Nageswara reddy, G.Narasa raju, and G.Srinivasarao, "The effect of supercharging and rice bran oil bio diesel as as additive in diesel-ethanol blends for diesel engines" - International Journal of Engineering Research and Science & Technology, Vol. 2, No.9,2013, 101-108.
  • V.Nageswara reddy, G.Srinivasarao and K.Thirupati reddy, "Study of engine Performance and exhaust gas emission characteristics of a 4 stroke CI engine operated with various blends of biodiesel and rice bran oil" - International Journal of Engineering Research and Science & Technology, Vol. 2, No.4,2013, 1-11.
  • Srinivasarao,G. and Neelakanteswararao, A., "Comparison of central composite and orthogonal array designs for cutting force and surface roughness prediction modeling in turning", International Journal of Materials and Production Technology (Inderscience ), Vol. 43, No.1-4, 2012, 144-164.
  • Venkata Siva S. B, G. Srinivasarao, Mahesh Kumar M, "Study of phase transformations in EN8 steel material using acoustic emission technique" - International Journal of Applied Sciences and Engineering Research, Vol. 3, No.3, 2012, 541-550.
  • Srinivasarao,G. and Neelakanteswararao, A.,"Tool parameters optimization using technique for order preference by similarity to ideal solution", International Journal of Advanced Manufacturing Systems, Vol.1(2),2010 , 127-134. ( This paper is forwarded to publish in this journal from The convener, International conference on Advances in Mechanical Engineering (ICAME- 2010), NIT Surat)
  • Sudheer.N.V.V.S. Rao. K.V.J. and Srinivasarao.G. "Study on influence of process parameters in turning of Aluminum metal matrix composite", ANU Journal of Engineering and Technology, Vol.2 (2), 2010, 5-7.
  • Srinivasarao,G. and Neelakanteswararao, A., "Application of central composite and orthogonal array designs for predicting the cutting force", International Journal of Manufacturing Science and Technology, Vol.3(2),2009 , 157-170.
  • Srinivasarao,G. and Neelakanteswararao, A., "Optimisation of Parameters in Turning", Caledonian Journal of Engineering, Vol.3(2),2007 , 12-17.

List of Paper Publications in International/National Conferences:

  • Suneeel D, Srinivasarao,G. "Optimization of multi responses using grey relational analysis and topsis", Proceedings of the 6th International & 27th All India Manufacturing Technology, design and research Conference (AIMTDR-2016), December 16-18th 1733-1737.
  • Srinivasarao G and Suneeel D. "Parametric optimization of WEDM on a- titanium alloy using desirability approach in the "International Conference on Emerging Trends in Materials and Manufacturing Engineering (IMME2017)" during 10 - 12th March, 2017 at National Institute of Technology, Tiruchirappalli and secured best paper of the session for the poster presentation.
  • Siva sankar raju. R, Mk Panigrahi, R I Ganguly, G. Srinivasarao "Optimization of tribological behavior on Al- Coconut shell ash composite at elevated temperature" International Conference on Advances in Metallurgy, Materials and Manufacturing, March 6-8, 2017.
  • Siva sankar raju. R, Mk Panigrahi, R I Ganguly, G. Srinivasarao "Investigation of tribological performance of hybrid aluminium metal matrix composites", 31st Indian Engineering Congress, Theme: SMART Technologies for natural resources conservation and sustainable development, 15-18th , December2016, Kolkata.
  • Siva sankar raju. R, Ak Senapathi, G. Srinivasarao "Estimation of Tribological performance of Al-MMC reinforced with a Novel In-situ ternary mixture", International Conference on recent innovation in engineering and technology (ICRIET), 5-6th November2016, GIET, Gunupur, Odisha.
  • Siva sankar raju. R, Ak Senapathi, G. Srinivasarao "Tribological performance of Al-MMC reinforced with treated fly ash using response surface methodlogy", International Conference on recent innovation in engineering and technology (ICRIET), 5-6th November2016, GIET, Gunupur, Odisha.
  • Siva sankar raju. R, G. Srinivasarao "Assessment of Desirability wear behavior on Al-coconut shell ash- Metal Matrix Composite using Grey-Fuzzy Reasoning Grade", International Conference on recent innovation in engineering ang technology (ICRIET), 5-6th November2016, GIET, Gunupur, Odisha.
  • SrinivasaRao.G, Suneel.D, Manikanta.KGSV, and Praveen.D. "Mathematical modeling of surface roughness in hard turning for evaluating the effects of process and tool parameters" Published in the Proceedings of International Conference on trends in Industrial and Mechanical Engineering (ICTIME 2016) during 4 - 6th November, 2015 at M.A. National Institute of Technology, Bhopal.
  • U.Gayatri, G.SrinivasaRao, Chitti Babu.G. "Development and characterization of banana stem fiber and latapoxy resin composites" Published in the Proceedings of National Conference on Advances in Mechanical and Material Science (AMMS-2015) 28th November, 2015
  • Siva sankar raju. R., Muralidhararao.M and G. Srinivasarao "Optimization of machinabilty properties on aluminium metal matrix composite prepared by In-situ ceramic mixture using coconut shell ash- Taguchi approachl" International Academic Multi Disciplinary Conference (IAMDC), 20-22, August 2015, Colombo, SriLanka.
  • Srinivasarao,G and Neelakanteswararao,A. "Modeling and Optimization of tool parameters in the presence of variable process conditions using taguchi robust design", Published in the Proceedings of International Conference on Industrial, Mechanical and Production Engineering: Advancements and Current Trends (ICIMPACT-2014) during 27 - 29th November, 2014 at M.A. National Institute of Technology, Bhopal.
  • P.Ajay kumar, G.Srinivasarao . "Review of recent studies on Fabrication of fabrication of Al and Mg Metal Matrix Nano Composites" Published in the Proceedings of National Conference on Advances in Composite Materials (NCACM-2015), Gandhi Institute of Engineering and Technology, Gunupur, Odisha, February 21-22, 2015.
  • R.Siva Sankar Raju, G.Srinivasarao . "Modeling and Optimization of Al/CSAP MMC Machining Using Taguchi approach" Published in the Proceedings of National Conference on Advances in Composite Materials (NCACM-2015), Gandhi Institute of Engineering and Technology, Gunupur, Odisha, February 21-22, 2015.
  • S.B.Venkata Siva, G. Srinivasarao and K. L. Sahoo, "Dry sliding wear behavior of Al-based composite prepared with novel in-situ ceramic composite developed from colliery waste using taguchi method" Published in the Proceedings of 2nd International Conference on Research in Science, Engineering and Technology (ICRSET 2014), Dubai(UAE) March 21-22, 2014.
  • Srinivasarao,G. "Design optimization of cutting parameters for turning Al 6061alloy", Published in the Proceedings of 2nd International Conference on Industrial Engineering (ICIE 2013), S.V. National Institute of Technology, Surat 20 - 22nd November. 2013.
  • Venkata Siva S B, Srinivasarao.G. Sahoo.K.L., "Tribological studies of Al-based composite: Developed from a waste material" Published in the Proceedings of International Conference on Mechanical Automotive and Materials Engineering (ICMAME 2013), Singapore, 29-30th April. 2013, pp.132-136.
  • Srinivasarao,G. and Neelakanteswararao,A., "Effect of Nano cutting fluid on surface roughness in hard turning", 4th International & 25th AIMTDR conference, December, 2012, 281-286.
  • Srinivasarao,G. and Neelakanteswararao,A., "Optimisation of tool parameters using taguchi inner-array and outer-array designs", Proceedings of the National Conference on Recent Advances in Mechanical Engineering (NCRAME), 2011, 208-211.
  • Venkatasiva.S.B. Srinivasarao.G. and Krishna Kishore.K. "Smart materials and its importance in present scenario", Proceedings of the National Conference on Recent Advances in Mechanical Engineering (NCRAME), 2011, 303-309.
  • Venkata Siva S B, R. G. Rao, Dr. R. I. Ganguly, Dr. R. R. Dash and Dr. G. Srinivasarao "Effect of different machining parameters on machinability of different aluminium metal matrix composites" Published in the Proceedings of National Conference on Processing and Characterization of Materials, NIT, Rourkela, 2-3rd Dec. 2011, pp.29.
  • Venkata Siva S. B, Dr. G. Srinivasarao, Dr. K. L. Sahoo, P.S. Srinivas "Effect Of Different Machining Parameters On Machinability Of Aluminium Metal Matrix Composite Developed Using Colliery Shale - A Waste Product From Coal Mines" Published in the Proceedings of International Conference on Futuristic Trends in Materials and Energy Systems, V. R. Siddhartha Engg. College, Vijayawada, 29 - 30th Dec. 2011, pp.133-140.
  • Venkata Siva S B, Dr. G. Srinivasarao, Dr. K. L. Sahoo, Amit Chatterjee and Anupam Paul "Development of Aluminium Metal Matrix Composite by using an in-situ ceramic composites" Published in the Proceedings of National Conference on advances in Materials Engineering, AU College of Engg. Andhra University, Visakhapatnam, 24 - 25th Feb. 2012, pp. 13.
  • Venkata Siva S B, Dr. K. L. Sahoo, Dr. S. K. Singh , Dr. R. R. Dash, Dr. R. I. Ganguly and Dr. G. Srinivasrao "Development of Aluminium Metal Matrix Composite Using Colliery Shale: A Waste Product from Indian Coal Mines" Proceedings of International Conference on Powder Metallurgy & Particulate Materials, Metal Power Industries Federation (MPIF), Nashville, Tennessee, USA, 10th-13th June. 2012, pp 9-1 to 9-13.
  • Srinivasarao,G. and Neelakanteswararao,A. and Sudheer, N.V.V.S. "Performance evaluation of carbide inserts on surface roughness in hard turning", Proceedings of the 3rd International & 24th AIMTDR conference, 2010, 647-651.
  • Srinivasarao,G. and Neelakanteswararao,A., "A Genetic algorithm approach to multi-objective optimization", Proceedings of the 3rd International &24th AIMTDR conference, 2010, 1199-1204.
  • Srinivasarao,G. and Neelakanteswararao,A., "Tool parameters optimization using Technique for order preference by similarity to ideal solution", Proceedings of the 4th International conference on Advances in Mechanical Engineering (ICAME), 2010, 301-306.
  • Sudheer, N.V.V.S, Rao,K.V.J, and Srinivasarao,G., "Optimal cutting conditions in turning of Al/Sic MMC based on experiment and a linear programming model", Proceedings of the 4th International conference on Advances in Mechanical Engineering (ICAME), 2010, 514-516.
  • Srinivasarao,G. and Neelakanteswararao,A., "Application of central composite and orthogonal array designs for predicting the cutting force", Proceedings of the 2nd International & 23rd AIMTDR conference, 2008, 799-812.
  • Srinivasarao,G. and Neelakanteswararao,A., "Optimal parametric combination for achieving the desired surface roughness in finish hard turning of AISI 52100 steel", Proceedings of the 2nd International &23rd AIMTDR conference, 2008, 861-866.
  • Srinivasarao,G. and Neelakanteswararao,A., "Optimization of parameters in turning", Proceedings of the International conference on modeling and simulation, 2007, 465-471.
  • Srinivasarao,G. and Neelakanteswararao,A., "Prediction of surface roughness model using design of experiments" International Conference on Intelligence systems and control (ISCO-2006), 2006.

Contact Details:
EMail: gsr [at] rvrjcce.ac.in
Phones: +91 8632288254 Ext: 212, +91 9949928949